Need help? Call us or text us: (480) 818-9373‬

Miller SofStop 928LS Shock Absorber for Fall Protection


The Miller 928LS SofStop Shock Absorber meets OSHA, ANSI, and CSA safety standards for fall protection.  Get yours now from

Out of stock


The Miller SofStop 928LS Shock Absorber is a must-have in environments where the potential for falls exists.  This shock absorber meets the following industry standards for fall protection:

  • OSHA 1926.502;
  • OSHA 1910.66
  • ANSI A10.32
  • CSA Z259.11

The Miller SofStop 928LS Shock Absorber is designed with a specially woven inner core that smoothly expands during a fall arrest. The webbing and safety strap are made of polyester, and the cover is made of vinyl. The hardware, which consists of a 3/4-inch locking snaphook and a 3-inch D-ring, is made of steel.   This shock absorber’s length when not is use is 18″.  It is available in a vibrant yellow color.

Technical Specifications of the Miller SofStop 928LS Shock Absorber include:

Webbing: Shock-absorbing webbing and Safety Strap (in SofStop pack): polyester
Cover: Vinyl
Thread: 6 cord bonded 3 strand polyester thread
Hardware: Steel
Locking Snap Hook: 3/4-in. (19mm) gate opening
D-Ring: 3-in. diameter (76mm)
* All hardware meets ASTM (50) fifty-hour salt spray test requirements.
Label Materials: Valeron

Maximum Working Load Capacity:

  • OSHA/ANSI: 310 lbs. (141 kg)
  • CSA: 254 lbs. (115 kg)

Length: 18 inches (457 mm)
Minimum Tensile Strength:

  • Webbing: 5,000 lbs. (22 kN)
  • D-Rings: 5,000 lbs (22 kN)
  • Thread: 42 lbs (19 kg) min. tensile strength

Meets Safety Standards: OSHA 1926.502, 1910.66; ANSI A10.32 and CSA Z259.11
Elongation/Deceleration  Distance: 42 in. (107cm)
Fall Arrest Force: 900 lbs. max. (4kN)
Elongation/Deceleration Distance: 48 in. (122cm)
Fall Arrest Force: 900 lbs. avg./1,800 lbs. max (4kN)

Additional information

Weight 5 lbs