Standard Truck / Light Van Wheel Chock – Fluted Rubber Grip Design
Get yourself one or two standard rubber wheel chocks for your car, truck, light van or other automobile. These wheel chocks use a fluted design to put downward pressure on tires to secure them.
This wheel chock is designed to secure cars, trucks, and light vans. It is made of fiber-reinforced rubber that keeps light trucks and vans in place. The wheel chock uses a gripping fluted design to increases downward pressure on the tire, which keeps the tires locked in place.
This standard size wheel chock weighs 8.5 pounds. It is 10 inches long x 8 inches tall x 6 inches wide.
If you’re looking for a heavy duty wheel chock for larger vehicles, we have those as well.
When using this wheel chock, the following precautions and protocol are highly recommended by the manufacturer.
Chocks should be used only after vehicle is completely stopped and parking brakes fully applied and tested. Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel. Always use wheel chocks in pairs and on firm surfaces. More than one pair may be required. Chock in direction of grade. Chock wheels on both sides of vehicle in direction of grade. Test chocks to ensure they meet your requirements. Always remove wheel chocks before attempting to move vehicle. Do not drive over wheel chocks. Improper use can result in product failure. These guidelines are not intended to be exhaustive. Please review and follow proper wheel chock procedures whenever using wheel chocks.