Description
The Miller SofStop 928LS Shock Absorber is a must-have in environments where the potential for falls exists. This shock absorber meets the following industry standards for fall protection:
- OSHA 1926.502;
- OSHA 1910.66
- ANSI A10.32
- CSA Z259.11
The Miller SofStop 928LS Shock Absorber is designed with a specially woven inner core that smoothly expands during a fall arrest. The webbing and safety strap are made of polyester, and the cover is made of vinyl. The hardware, which consists of a 3/4-inch locking snaphook and a 3-inch D-ring, is made of steel. This shock absorber’s length when not is use is 18″. It is available in a vibrant yellow color.
Technical Specifications of the Miller SofStop 928LS Shock Absorber include:
Material
Webbing: Shock-absorbing webbing and Safety Strap (in SofStop pack): polyester
Cover: Vinyl
Thread: 6 cord bonded 3 strand polyester thread
Hardware: Steel
Locking Snap Hook: 3/4-in. (19mm) gate opening
D-Ring: 3-in. diameter (76mm)
* All hardware meets ASTM (50) fifty-hour salt spray test requirements.
Label Materials: Valeron
Technical/Certification
Maximum Working Load Capacity:
- OSHA/ANSI: 310 lbs. (141 kg)
- CSA: 254 lbs. (115 kg)
Length: 18 inches (457 mm)
Minimum Tensile Strength:
- Webbing: 5,000 lbs. (22 kN)
- D-Rings: 5,000 lbs (22 kN)
- Thread: 42 lbs (19 kg) min. tensile strength
Meets Safety Standards: OSHA 1926.502, 1910.66; ANSI A10.32 and CSA Z259.11
Elongation/Deceleration Distance: 42 in. (107cm)
Fall Arrest Force: 900 lbs. max. (4kN)
Elongation/Deceleration Distance: 48 in. (122cm)
Fall Arrest Force: 900 lbs. avg./1,800 lbs. max (4kN)